Fabric and Interfacing
• 1 yd Non-Directional Exterior Fabric*
• 12” Pre-made ½” double fold bias tape
*Recommended fabrics include: Ripstop Nylon, Nylon
Taffeta, Boardshort Fabric, Medium Weight Canvas.
This pattern is not suitable for quilting cotton and
similar fabrics.
If your fabric is directional and less than 48” wide,
you will need 1 yd 2” of fabric to account for seaming
your panels.
Hardware and Notions
• (1 ½ yd) 1” Wide Strap Webbing
• 24” #5 Continuous Zipper Tape w/ 1 slide
• (8”) 1/8” Wide Elastic
• Matching Thread
• Marking Pen
• Sewing Pins/Clips
• Fabric Shears
• Seam Ripper
• Sewing Machine w/ zig zag function OR serger
• Rotary Cutter
• Acrylic Ruler
= Stitch Line
= Mark Line
Special Instructions
• Before starting, read all pattern instructions
• Seam allowance is 3/8" unless otherwise
stated. This includes zipper seam allowances
• Basting seam allowances are 1/4"
• Backstitch at start and stop of all seams
Printing Instructions
This pattern is measure and cut and does not
have any pattern pieces
Mod Note: Approx. Finished Measurements: 14” W x 12” H x 4”D when expanded. This is a "measure and cut" pattern so there are no pattern printables. Includes instructions and measurements for cutting.
upgrade card
set top card
replt card
Noisy card
Colorizer
Jack
chekccard