If my design is 6x8, what size of frame?

I cant afford custom framing.  What size of frame do I need for a 6x8" design, with or without a mat?  I would prefer a mat.  

Duckeyd

I typically add at least 3 inches all around when I buy my fabric if you wish to frame with a mat. It needs to go all the way to the edge of the mat then leave enough to wrap around the mounting board. If your piece comes up short there are boards that you can cut to size. Measure your finished piece and cut the first piece to size. Then wrap and secure the back of your finished work to this board. Next decide how much you are short for your frame. Cut sides, top and bottom pieces to make up the difference. These four pieces will be the outer border of your finished piece. You finished piece should snuggly fit in the center. Since your mat should already be in the frame all you need to do now is add the back to all of it and you will never see that you pieced together your mounting boards. There are acid free archival safe sticky boards you can also use. Since this is adhesive based you just place your piece on the board press to adhere the fabric to the board and your done. This of course is cringe worthy to most experienced stitchers, but it is an option or a last resort. You can also use the lace method if you have enough fabric to do so at the back. Have a look on the internet. YouTube may offer you a bunch of different options that may get you on your way. Very good luck.

CraftyLouAnna

You might find one that size in a frame store, but the next size up that is standard is an 8X10; available in any craft or department store.   

SallySue

I shop garage sales and thrift stores for frames.  I have a stash in my closet!  Anyhow, then if I need to Ill get a mat cut that will work with the frame and the piece.  Its a pretty inexpensive way to frame things.